AbstractAbout AuthorsReferences
A rigid screw connection consisting of prefabricated reinforced concrete columns interconnected by a screw connection, as well as prefabricated crossbars containing embedded parts connected by screws, as well as prefabricated floor slabs containing embedded parts in their four corners is proposed. The use of such a unit leads to an increase in the quality of installation of prefabricated buildings and a reduction in construction time.
S.A. SYCHEV1, Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.);
G.M. BADIN3, Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.);
AL-HABEEB Ahmed A.1, Postgraduate, (This email address is being protected from spambots. You need JavaScript enabled to view it.);
ABASS Agadeer А.1,2, Postgraduate (This email address is being protected from spambots. You need JavaScript enabled to view it.)
G.M. BADIN3, Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.);
AL-HABEEB Ahmed A.1, Postgraduate, (This email address is being protected from spambots. You need JavaScript enabled to view it.);
ABASS Agadeer А.1,2, Postgraduate (This email address is being protected from spambots. You need JavaScript enabled to view it.)
1 Ural Federal University named after the First President of Russia B.N. Yeltsin” (19, Mira Street, Yekaterinburg, Sverdlovsk oblast 620002, Russian Federation)
2 University of Diyala (Diyala city, 32001, Iraq)
3 Russian Academy of Architecture and Construction Sciences (19, Noviy Arbat Street, Moscow, 127025, Russian Federation)
1. Sychev S.A. Perspective high-tech building systems for prefabricated transformable multi-storey buildings. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2018. No. 4, pp. 36–40.
2. Oleinik P.P. Industrial’no-mobil’nye metody vozvedeniya predpriyatii, zdanii i sooruzhenii [Industrial-mobile methods of construction of enterprises, buildings and structures]. Moscow: ASV. 2021. 488 p.
3. Topchiy D.V., Kochurina E.O., Zalmanov A.A. Technology “Top and down”. Technologiya I organizatsia stroitelnogo proizvodstva. 2016. No. 1 (11), pp. 7–10.
4. Lapidus A.A., Vasneva D.A. Optimization of construction flows by reducing the time of concrete work. Technologiya I organizatsia stroitelnogo proizvodstva. 2016. No. 1 (11), pp. 3–6.
5. Sychev S.A., Bad’in G.M. Tekhnologii stroitel’stva i rekonstruktsii ehnergoehffektivnykh zdanii [Technologies of construction and reconstruction of energy-efficient buildings]. Saint Petersburg: BHV-Peterburg. 2017. 464 p.
6. Sychev S.A., Badin G.M., Abass Agadeer A., Al-Habeeb Ahmed A. Passive methods of mounting elements of volume-block housing construction in conditions of limited energy resources. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2022. No. 10, pp. 27–32. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2022-10-27-32
7. Sychev S.A. Technological principles of accelerated housing construction, the prospect of automated and robotic assembly of buildings. Promyshlennoe i grazhdanskoe stroitel’stvo. 2016. No. 3, pp. 66–70. (In Russian).
8. Guan D., Jiang C., Guo Z., Ge H., Development and seismic behavior of precast concrete beam-to-column connections. Journal of Earthquake Engineering. 2016. No. 22, pp. 234–256.
9. Girgin S.C., Misir I.B., Kahraman S., Experimental cyclic behavior of precast hybrid beam-column connections with welded components. International Journal of Concrete Structures and Materials. 2017. No. 11 (2), pp. 229–245.
2. Oleinik P.P. Industrial’no-mobil’nye metody vozvedeniya predpriyatii, zdanii i sooruzhenii [Industrial-mobile methods of construction of enterprises, buildings and structures]. Moscow: ASV. 2021. 488 p.
3. Topchiy D.V., Kochurina E.O., Zalmanov A.A. Technology “Top and down”. Technologiya I organizatsia stroitelnogo proizvodstva. 2016. No. 1 (11), pp. 7–10.
4. Lapidus A.A., Vasneva D.A. Optimization of construction flows by reducing the time of concrete work. Technologiya I organizatsia stroitelnogo proizvodstva. 2016. No. 1 (11), pp. 3–6.
5. Sychev S.A., Bad’in G.M. Tekhnologii stroitel’stva i rekonstruktsii ehnergoehffektivnykh zdanii [Technologies of construction and reconstruction of energy-efficient buildings]. Saint Petersburg: BHV-Peterburg. 2017. 464 p.
6. Sychev S.A., Badin G.M., Abass Agadeer A., Al-Habeeb Ahmed A. Passive methods of mounting elements of volume-block housing construction in conditions of limited energy resources. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2022. No. 10, pp. 27–32. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2022-10-27-32
7. Sychev S.A. Technological principles of accelerated housing construction, the prospect of automated and robotic assembly of buildings. Promyshlennoe i grazhdanskoe stroitel’stvo. 2016. No. 3, pp. 66–70. (In Russian).
8. Guan D., Jiang C., Guo Z., Ge H., Development and seismic behavior of precast concrete beam-to-column connections. Journal of Earthquake Engineering. 2016. No. 22, pp. 234–256.
9. Girgin S.C., Misir I.B., Kahraman S., Experimental cyclic behavior of precast hybrid beam-column connections with welded components. International Journal of Concrete Structures and Materials. 2017. No. 11 (2), pp. 229–245.
For citation: Sychev S.A., Badin G.M., Al-Habeeb Ahmed A., Abass Agadeer A. Technology of accelerated screw and bolt connections of reinforced concrete elements of column-crossbar type. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2023. No. 1–2, pp. 61–64. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2023-1-2-61-64