Double-Layer External Panel in Industrial Buildings

Number of journal: 10-2023
Autors:

Nikolaev S.V.

DOI: https://doi.org/10.31659/0044-4472-2023-10-9-13
УДК: 624.03

 

AbstractAbout AuthorsReferences
The use of prefabricated reinforced concrete structures has become more common in the construction of both low-rise and high-rise buildings. The author draws attention to a number of ineffective solutions that were used in low-rise housing construction when using single- and three-layer factory-produced exterior panels. These solutions were implemented during the construction of a cottage settlement in the Moscow region. A detailed analysis of the disadvantages of the method of construction of low-rise panel houses from single- and three-layer panels is carried out. It is shown that the use of two-layer panels of external walls is applied for the first time in low-rise housing construction. The possibility of application in multi-storey and apartment buildings is considered. A variant solution is given for the facade design of panel buildings using plaster layers, plank, thermal panels for bricks or facing tiles.
S.V. NIKOLAEV, Doctor of Sciences (Engineering), Honored Builder of the Russian Federation, Scientific Supervisor (This email address is being protected from spambots. You need JavaScript enabled to view it.)

JSC “TSNIIEPzhilishcha” – Institute of Comprehensive design of residential and public buildings (JSC “TSNIIEPzhilishcha”) (9, bldg.3, Dmitrovskoye Highway, Moscow, 127434, Russian Federation)

1. Guryev V.V., Dmitriev A.N., Yakhind S.I. Experimental and standard design – a strategic vector of development of industrial civil construction. Promyshlennoe i gragdanskoe stroitelstvo. 2022. No. 7, pp. 40–47. (In Russian).
2. Guryev V.V., Yakhkind S.I. The main trends in the development of civil engineering at the present stage. ACADEMIA. Architectura i stroitelstvo. 2022. No. 3, pp. 97–103. (In Russian).
3. Golovin N.G., Fedorov Yu.N., Kozlov A.S. BENPAN – innovation technology of prefabricated low-rise housing construction. Stroitel’nye Materialy [Construction Materials]. 2020. No. 3, pp. 24–26. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2020-779-3-24-26
4. Nikolaev S.V. Two-layer factory-made exterior panel for low-rise housing construction. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2023. No. 3, pp. 3–10. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2023-3-3-10
5. Nikolaev S.V. Monolithic-panel low-rise buildings. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2022. No. 3, pp. 8–15. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2022-3-8-15
6. Nikolaev S.V. Construction of low-rise housing from house sets of factory production. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2021. No. 5, pp. 3–8. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2021-5-3-8
7. Sokolov B.S., Zenin S.A. Analysis of the regulatory base for designing reinforced concrete structures. Stroitel’nye Materialy [Construction Materials]. 2018. No. 3, pp. 4–12. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2019-768-3-4-10
8. Krasheninnikov A.V., Per’kova M.V. Town-planning prospects. Architecturа i stroitelstvo Rossii. 2022. No. 3 (243), pp. 4–7. (In Russian).
9. Davidyuk A.N., Nesvetaev G.V. Large-panel housing construction – an important provision for solving the housing problem In Russia. Stroitel’nye Mate-rialy [Construction Materials]. 2013. No. 3, pp. 24–26. (In Russian).

For citation: Nikolaev S.V. Double-layer external panel in industrial buildings. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2023. No. 10, pp. 9–13. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2023-10-9-13


Print   Email