Levels of Detail of Digital Models of Steel Structures

Number of journal: 8-2022
Autors:

Alekseeva A.S.,
Buzalo N.A.,
Postovalov A.I.,
Chernykhovsky B.A.

DOI: https://doi.org/10.31659/0044-4472-2022-8-17-21
УДК: 693.8

 

AbstractAbout AuthorsReferences
The process of forming an information model of an object and the possible levels of detail of the model depending on the task are considered. When creating a model, it is necessary to determine the required level of detail elaboration, the capabilities of the available software and computer equipment. The formed information model is a computer model of a really existing structure throughout its life and reflects all changes, additions to the current and future state. Depending on the type of structure, it is necessary to take into account physical, geometric or constructive nonlinearity, which significantly affects the formulation of the problem, its dimension, and the method of solution. In addition, it is necessary to competently analyze the results of the calculation, and, if necessary, perform their verification, including by physical experiment.
A.S. ALEKSEEVA1, Engineer (This email address is being protected from spambots. You need JavaScript enabled to view it.),
N.A. BUZALO1, Candidate of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.);
A.I. POSTOVALOV2, Engineer;
B.A. CHERNYKHOVSKY1, Engineer (This email address is being protected from spambots. You need JavaScript enabled to view it.)

1 South Russian State Polytechnic University (NPI) named afer M.I. Platov (132, Enlightenment Street, Novocherkassk, 346428, Rostov Region, Russian Federation)
2 Research Institute of Building Physics, RAACS (21, Lokomotivny Proezd, Moscow, 127238, Russian Federation)

1. Криксунов Э.З., Перельмутер А.В. О расчетных моделях сооружений и возможностях их анализа // CADmaster. 2000. № 3. С. 38–43.
1. Kriksunov E.Z., Perelmuter A.V. On the design models of structures and the possibilities of their analysis. CADmaster. 2000. No. 3, pp. 38–43. (In Russian).
2. Поляков Л.П., Файнбурд В.М. Моделирование строительных конструкций. Киев: Будiвельник, 1975. 160 с.
2. Polyakov L.P., Fainburd V.M. Modelirovaniye stroitel’nykh konstruktsiy [Modeling of building structures]. Kyiv: Budivel’nik. 1975. 160 p.
3. Букунов А.С. Обработка информации для принятия решений при информационном моделировании. BIM-моделирование в задачах строительства и архитектуры. СПб.: СПбГАСУ, 2020. C. 386–392. DOI: https://doi.org/10.23968/BIMAC.2020.050 https://elibrary.ru/item.asp?id=43060825
3. Bukunov A.S. Information processing for decision-making in information modeling. BIM-modeling in construction and architecture problems. St. Petersburg: SPbGASU. 2020, pp. 386–392. (In Russian). DOI: https://doi.org/10.23968/BIMAC.2020.050 https://elibrary.ru/item.asp?id=43060825
4. Згода Ю.Н., Семенов А.А. Перспективы развития программного и аппаратного обеспечения BIM-моделирования. Новые информационные технологии в архитектуре и строительстве: Материалы научно-практической конференции с международным участием. Екатеринбург: ­УрГАХУ, 2020. С. 43–48.
4. Zgoda Yu.N., Semenov A.A. Prospects for the development of software and hardware for BIM modeling. New information technologies in architecture and construction: materials of a scientific and practical conference with international participation. Yekaterinburg: UrGAHU. 2020, pp. 43–48. (In Russian).
5. Петров Д.С., Сальников А.Ю. BIM-технологии в строительной отрасли и актуальность их внедрения. Актуальные проблемы строительства, ЖКХ и техносферной безопасности: Материалы VII Всероссийской (с международным участием) научно-технической конференции молодых исследователей. Волгоград: ВолГТУ, 2020. С. 68–70.
5. Petrov D.S., Salnikov A.Yu. BIM-technologies in the construction industry and the relevance of their implementation. Actual problems of construction, housing and communal services and technosphere safety: Proceedings of the VII All-Russian (with international participation) scientific and technical conference of young researchers. Volgograd: VolGTU. 2020, pp. 68–70.
6. Бароев Р.В. Расчет узлов стальных конструкций компонентным методом конечных элементов // CADmaster. 2019. № 3 (91). С. 95–101.
6. Baroev R.V. Calculation of nodes of steel structures by the component finite element method. CADmaster. 2019. No. 3 (91), pp. 95–101. (In Russian).
7. Ведяков И.И. Еремеев П.Г. К вопросу живучести строительных конструкций // Строительная механика и расчет сооружений. 2008. № 4. С. 76–78.
7. Vedyakov I.I. Eremeev P.G. On the issue of survivability of building structures. Stroitel’naya mekhanika i raschet sooruzheniy. 2008. No. 4, рр. 76–78. (In Russian).
8. Еремеев П.Г. Современные стальные конструкции большепролетных покрытий уникальных зданий и сооружений. М.: АСВ, 2009. 336 с.
8. Eremeev P.G. Sovremennyye stal’nyye konstruktsii bol’sheproletnykh pokrytiy unikal’nykh zdaniy i sooruzheniy [Modern steel structures for large-span coatings of unique buildings and structures]. Moscow: ASV. 2009. 336 p.
9. Brockenbrough Roger L., Frederick S. Merritt Structural steel designer’s handbook. McGraw-Hill, 1999.
10. Vu A.-T., Werner F. Optimization of steel structures based on differential evolution algorithm. 18th International Conference on the Application of Computer Science and Mathematics in Architecture and Civil Engineering. Weimar. Germany. 07–09 July 2009.
11. Перельмутер А. В. Избранные проблемы надежности и безопасности строительных конструкций. М.: АСВ, 2007. 256 с.
11. Perelmuter A.V. Izbrannyye problemy nadezhnosti i bezopasnosti stroitel’nykh konstruktsiy. [Selected problems of reliability and safety of building structures]. Moscow: ASV. 2007. 256 p.

For citation: Alekseeva A.S., Buzalo N.A., Postovalov A.I., Chernykhovsky B.A. Levels of detail of digital models of steel structures. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2022. No. 8, pp. 17–21. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2022-8-17-21


Print   Email