AbstractAbout AuthorsReferences
The technical survey purpose in this article is assessing the building structures state. The main survey objectives are: archival design analysis, survey and as-built documentation, a general description of the terrace layout, building structures visual inspection (supporting steel frame structures (columns, beams, girders, ties, half-timbered structures, fasteners; welds); welded seams; sandwich-panels, stained-glass windows, their attachment points; terrace covering (in openings places), namely, load-bearing structures (corrugated board), vapor barrier layer, heat-insulating layer, roof (PVC membrane) and nodes of its abutment to existing facades) with identification and photographic recording of characteristic visible defects and damage (up to 10% of the total number of structures). Also, elements measurements of load-bearing structures and assemblies were carried out in the volume necessary for carrying out a technical survey, a visual sample survey of metal structures protective coatings, an assessment of building structures conformity, conditions determination necessary for the installation of an exploited roof on the northern terrace, determination technical condition of building structures in accordance with state standard 31937–2011, the generalized recommendations development, that is, a descriptive nature, for the identified defects elimination and damage to structures. In addition, within the framework of this work, selective visual and measuring control of welded joints in metal structures was carried out.
V.I. RIMSHIN1, Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
P.S. TRUNTOV1, Undergraduate (This email address is being protected from spambots. You need JavaScript enabled to view it.);
E.S. KETSKO2, Postgraduate student (This email address is being protected from spambots. You need JavaScript enabled to view it.)
P.S. TRUNTOV1, Undergraduate (This email address is being protected from spambots. You need JavaScript enabled to view it.);
E.S. KETSKO2, Postgraduate student (This email address is being protected from spambots. You need JavaScript enabled to view it.)
1 National Research Moscow State University of Civil Engineering (26, Yaroslavskoe Highway, Moscow, 129337, Russian Federation)
2 Scientific-Research Institute of Building Physics of the Russian Academy Architecture and Construction Sciences (21, Lokomotivniy Driveway, Moscow, 127238, Russian Federation)
1. Anpilov S.M., Rimshin V.I., Eryshev V.A., Gainullin M.M., Murashkin V.G., Anpilov M.S., Sorochaykin A.N., Kitaykin A.N. Fasadnye sistemy [Facade systems]. Experimental design research. Collection of articles. Edited by V.P. Selyaev. Tolyatti: Institute of Forensic Construction and Technical Expertise, 2021, pp. 4–6.
2. Varlamov A.A., Rimshin V.I. Modeli povedeniya betona. Obshchaya teoriya degradatsii [Models of concrete behavior. General theory of degradation]. Moscow: INFRA-M. 2019. 436 p. DOI: 10.12737/monography_5c8a716e3c4460. 52838016
3. Kuzina I.S. Method of inspection of the technical condition of the roof. In the collection: Construction. Architecture. Design. Materials of the All-Russian Scientific and Practical Conference of Young Scientists. Kursk. 2020, pp. 116–119. (In Russian).
4. Kuzina I.S. Methods of thermal imaging survey in the framework of work on the reconstruction of buildings and structures. Collection of reports of the Scientific and Technical Conference on the results of research works of students of the Institute of Engineering and Environmental Construction and Mechanization of the National Research University of Moscow State Technical University. 2020, pp. 128–131. (In Russian).
5. Rimshin V.I., Ketsko E.S., Truntov P.S., Kuzina I.S., Bykov G.S. Verification calculations of building structures in the framework of a comprehensive technical survey. Actual problems of the construction industry and education. Collection of reports of the First National Conference. 2020, pp. 148–155. (In Russian).
6. Kiryatkova A.V., Kochkin A.A., Shubin I.L., Shashkova L.E. Experimental studies of sound insulation of double enclosing structures made of layered elements. Biosfernaya sovmestimost’: chelovek, region, tekhnologii. 2020. No. 4 (32), pp. 73–79. (In Russian).
7. Donchenko O.M., Suleymanova L.A., Rimshin V.I., Ryabchevskiy I.S. Tensile deformations of «mild» reinforcing steels for reinforced concrete structures. Lecture Notes in Civil Engineering. 2021. Vol. 147, pp. 302–308.
8. Graboviy P. Construction management and real estate development. Part I: Construction management. Stockholm: Bokforlaget Efron & Dotter AB. 20202. 674 p.
9. Merkulov S., Rimshin V., Akimov E., Kurbatov V., Roschina S. Regulatory support for the use of composite rod reinforcement in concrete structures. IOP Conference Series: Materials Science and Engineering. International Conference on Materials Physics, Building Structures and Technologies in Construction, Industrial and Production Engineering. 2020. 012022.
10. Varlamov A., Kostyuchenko Y., Rimshin V., Kurbatov V. Diagrams of concrete behavior over time. IOP Conference Series: Materials Science and Engineering. International Conference on Materials Physics, Building Structures and Technologies in Construction, Industrial and Production Engineering, 2020. 012085.
11. Varlamov A., Shafranovskaya T., Rimshin V., Kurbatov V. The two-factor destructions model of the composite. IOP Conference Series: Materials Science and Engineering. International Conference on Materials Physics, Building Structures and Technologies in Construction, Industrial and Production Engineering, 2020. 012086.
12. Degaev E., Rimshin V. I. Checking the integrity of saws by seismoacousticdefectos copy. Journal of Physics: Conference Series. International Scientific Conference on Modeling and Methods of Structural Analysis, 2019. 2020. 012153.
13. Eryshev V.A., Karpenko N.I., Rimshin V.I. The parameters ratio in the strength of bent elements calculations by the deformation model and the ultimate limit state method. IOP Conference Series: Materials Science and Engineering. 2020. Vol. 753. 022076. doi:10.1088/1757-899X/753/2/022076
14. Borkovskaya V.G., Degaev E.N., Rimshin V.I., Shubin I.L. Problems and risks of control in the housing and community services industry. IOP Conference Series: Materials Science and Engineering. 2020. Vol. 753. 052046 DOI: 10.1088/1757-899X/753/5/052046
15. Karpenko N.I., Rimshin V.I., Eryshev V.A., Shubin L.I. Deformation models of concrete strength calculation in the edition of Russian and foreign norms. IOP Conference Series: Materials Science and Engineering. 2020. Vol. 753. 052043 DOI: 10.1088/1757-899X/753/5/052043
16. Mosakov B.S., Kurbatov V.L., Rimshin V.I. Osnovy tekhnologicheskoi mekhaniki tyazhelykh betonov [Fundamentals of technological mechanics of heavy concrete]. Mineralnye Vody: KMB SKF BSTU im. V.G. Shukhov. 2017. 210 p.
2. Varlamov A.A., Rimshin V.I. Modeli povedeniya betona. Obshchaya teoriya degradatsii [Models of concrete behavior. General theory of degradation]. Moscow: INFRA-M. 2019. 436 p. DOI: 10.12737/monography_5c8a716e3c4460. 52838016
3. Kuzina I.S. Method of inspection of the technical condition of the roof. In the collection: Construction. Architecture. Design. Materials of the All-Russian Scientific and Practical Conference of Young Scientists. Kursk. 2020, pp. 116–119. (In Russian).
4. Kuzina I.S. Methods of thermal imaging survey in the framework of work on the reconstruction of buildings and structures. Collection of reports of the Scientific and Technical Conference on the results of research works of students of the Institute of Engineering and Environmental Construction and Mechanization of the National Research University of Moscow State Technical University. 2020, pp. 128–131. (In Russian).
5. Rimshin V.I., Ketsko E.S., Truntov P.S., Kuzina I.S., Bykov G.S. Verification calculations of building structures in the framework of a comprehensive technical survey. Actual problems of the construction industry and education. Collection of reports of the First National Conference. 2020, pp. 148–155. (In Russian).
6. Kiryatkova A.V., Kochkin A.A., Shubin I.L., Shashkova L.E. Experimental studies of sound insulation of double enclosing structures made of layered elements. Biosfernaya sovmestimost’: chelovek, region, tekhnologii. 2020. No. 4 (32), pp. 73–79. (In Russian).
7. Donchenko O.M., Suleymanova L.A., Rimshin V.I., Ryabchevskiy I.S. Tensile deformations of «mild» reinforcing steels for reinforced concrete structures. Lecture Notes in Civil Engineering. 2021. Vol. 147, pp. 302–308.
8. Graboviy P. Construction management and real estate development. Part I: Construction management. Stockholm: Bokforlaget Efron & Dotter AB. 20202. 674 p.
9. Merkulov S., Rimshin V., Akimov E., Kurbatov V., Roschina S. Regulatory support for the use of composite rod reinforcement in concrete structures. IOP Conference Series: Materials Science and Engineering. International Conference on Materials Physics, Building Structures and Technologies in Construction, Industrial and Production Engineering. 2020. 012022.
10. Varlamov A., Kostyuchenko Y., Rimshin V., Kurbatov V. Diagrams of concrete behavior over time. IOP Conference Series: Materials Science and Engineering. International Conference on Materials Physics, Building Structures and Technologies in Construction, Industrial and Production Engineering, 2020. 012085.
11. Varlamov A., Shafranovskaya T., Rimshin V., Kurbatov V. The two-factor destructions model of the composite. IOP Conference Series: Materials Science and Engineering. International Conference on Materials Physics, Building Structures and Technologies in Construction, Industrial and Production Engineering, 2020. 012086.
12. Degaev E., Rimshin V. I. Checking the integrity of saws by seismoacousticdefectos copy. Journal of Physics: Conference Series. International Scientific Conference on Modeling and Methods of Structural Analysis, 2019. 2020. 012153.
13. Eryshev V.A., Karpenko N.I., Rimshin V.I. The parameters ratio in the strength of bent elements calculations by the deformation model and the ultimate limit state method. IOP Conference Series: Materials Science and Engineering. 2020. Vol. 753. 022076. doi:10.1088/1757-899X/753/2/022076
14. Borkovskaya V.G., Degaev E.N., Rimshin V.I., Shubin I.L. Problems and risks of control in the housing and community services industry. IOP Conference Series: Materials Science and Engineering. 2020. Vol. 753. 052046 DOI: 10.1088/1757-899X/753/5/052046
15. Karpenko N.I., Rimshin V.I., Eryshev V.A., Shubin L.I. Deformation models of concrete strength calculation in the edition of Russian and foreign norms. IOP Conference Series: Materials Science and Engineering. 2020. Vol. 753. 052043 DOI: 10.1088/1757-899X/753/5/052043
16. Mosakov B.S., Kurbatov V.L., Rimshin V.I. Osnovy tekhnologicheskoi mekhaniki tyazhelykh betonov [Fundamentals of technological mechanics of heavy concrete]. Mineralnye Vody: KMB SKF BSTU im. V.G. Shukhov. 2017. 210 p.
For citation: Rimshin V.I., Truntov P.S., Ketsko E.S. Scientific and technical structures expertise for the open terraces re-equipment in the multifunctional complex. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2021. No. 7, pp. 37–41. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2021-7-37-41