Improvement of Movement and Storage of Metal Forms at the Large-Panel Housing Construction Plant

When producing reinforced concrete products at enterprises of large-panel housing construction with a capacity of 100 thousand m² of total area per year, one of the important is the problem of storage of metal forms, most often in the warehouse of finished products, and their transportation to the necessary production lines. At the enterprise, as a rule, the areas for storage of metal forms are not enough and therefore their warehousing is executed in stacks of more than 2,5 m height. As a result, a large amount of working time is spent for the extraction of the required metal form or pallet-trolley for delivery to the production line. As a rule, finished products warehouses for finished reinforced concrete products (external and internal wall panels, floor slabs, etc.) are equipped with racks with props with brackets for storing products in a vertical position. In order to improve the storage and movement of metal forms, the task was set to consider the possibility of their storage also in a vertical position on storage sites. As a result of the calculations performed and the mathematical modeling conducted, the stability and safety of storage of metal forms in a vertical position is confirmed, which makes it possible to operatively transport the necessary grades of metal forms to the required production line. This method of storage of metal forms in the warehouse of finished products is approbated and practiced at OOO UK «Bryansk Large-Panel Housing Construction Plant».

E.F. FILATOV, Head of Construction Laboratory (This email address is being protected from spambots. You need JavaScript enabled to view it.)
V.S. YANCHENKO, Cabdidate of Sciences (Engineering)
A.V. IVANKOV, Engineer-Builder-Technologist

OOO SZ USK “Nadezhda” (1, bldg. 11, Bezhitskaya Street, Bryansk, 214007, Russian Federation)

1. Granik Yu.G. Zavodskoe proizvodstvo ehlementov polnosbornyh domov [Factory production of elements of prefabrication houses]. Moscow: Stroyizdat. 1984. 222 p.
2. Granik Yu.G., Poltavtsev S.I. Rekonstrukciya i tekhnicheskoe perevooruzhenie predpriyatij polnosbornogo domostroeniya [Reconstruction and modernization of the enterprises of prefabrication housing construction]. Moscow: Stroyizdat. 1989. 268 p.
3. Filatov E.F. The domestic equipment at the Bryansk plant of large-panel housing construction. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2015. No. 10, pp. 21–27. (In Russian).
4. Filatov E.F. Decrease in material capacity of products of large-panel housing construction. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2016. No. 10, pp. 30–33. (In Russian).
5. Mitnik G.S. Novye napravleniya v konstruirovanii form dlya sbornogo zhelezobetona [New directions in the design of forms for precast concrete]. Moscow: CNIITMASH. 1978. 59 p.
6. Nikolaev S.V. Revival of house-building combines on the domestic equipment. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2015. No. 5, pp. 4–8. (In Russian).
7. Sokolov B.S., Zenin S.A. Analysis of the regulatory base for designing reinforced concrete structures. Stroitel’nye Materialy [Construction Materials]. 2018. No. 3, pp. 4–12. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2018-757-3-4-12
8. Filatov E.F., Lokutcova N.P. K voprosu sovershenstvovaniya izgotovleniya izdelij krupnopanel’nogo domostroeniya [To a question of improvement of production of products of large-panel housing construction]. The prospects of development of new technologies in construction and preparation of engineering shots of Republic of Belarus: Materials of the international scientific and methodical seminar. Mogilev, on November 16–18, 2005. Belarusian-Russian University. 2005, pp. 474–479. (In Russian).
9. Filatov E.F. K to a question of improvement of technological repartitions of factory production of concrete goods and designs. Improvement of quality of construction works, materials and design decisions. International collection of scientific works. Vol. 2. Bryansk: BGITA. 2000, pp. 183–194. (In Russian).
10. Filatov E.F. Improvement of technological process of production of reinforced concrete designs and products at the Bryansk plant of large-panel housing construction. Technology and organization of production of building constructions of products and materials: scientific and technical information collection. Yaroslavl. 1992. No. 1–2, pp. 8–11. (In Russian).